GE Typhoon 9200, Руководство по эксплуатации

Страница: 44 / 78

Typhoon Operating Instructions 28-9623-56 AA
43
Operation 4
Performing a scanning 4.4
Typhoon instrument states
The Typhoon instrument can be in one of five states. The Typhoon Scanner Control
window Instrument State area (A) displays the current instrument state ( Warming Up ,
Ready , Sleep , Initialization or Scanning ) and an Initialize Scanne r button.
1 Warming Up
The Warming Up message is shown for 5 minutes after you turn on the system or
click the Initialize Scanner button.
Note: Complete warm-up takes 30 minutes when the instrument is turned on.
2 Ready
The instrument is ready to scan.
Note: If you just turned on the instrument, the Ready message appears after
approximately 5 minutes. However, for best performance, the instrument
should be warm up for the full 30 minutes before scanning.
3 Sleep
The lasers have been shut off and the Sleep state message appears. This happens
when the instrument has not been used for the preset time (default setting is 4
hours, change time by using the Typhoon Direct Instrument Access software).
4 Initialization
After you click the Scan button, the Initialization state message appears. It
remains displayed until the instrument begins scanning.
Initialization state takes approximately 1 minute if the prior instrument state was
Ready , and approximately 5 minutes if the prior instrument state was Sleep or
Warming Up .
A