![GE TURBOCOOL 23 Скачать руководство пользователя страница 53](http://html2.mh-extra.com/html/ge/turbocool-23/turbocool-23_manual_4196126053.webp)
5
3
To remove, take away all the food,
slide out to the top position, lift the
front past the stop position, and
slide out.
Make sure you push the shelves all
the way back in before you close the
door.
To remove, slide out completely to the stop
position. Lift the front past the stop
position, and slide out.
Make sure you push the crispers all the way
back in before you close the door.
Freezer Crisper
Freezer shelves
About the additional features.
Not all features are on all models.
ShelfSaver
™
Rack
(on some models)
Use this rack to store
beverage cans for easy
access.
It can also hold a 9 x 13
baking dish.
This door rack holds up
to 9 cans.
NOTE:
This rack can only be
mounted in the top position
under the dairy bin.
Door Can Rack
(on some models)
1
2
Removable Beverage Rack
The beverage rack is designed to hold a bottle on its side. It
to any slide-out shelf.
To install:
Line up the large part of the slots on
the top of the rack with the tabs under the shelf.
Then slide the rack back to lock it in place.
can be attached
About the refrigerator doors.
Refrigerator Doors
The refrigerator doors may feel different
than the ones you are used to. The special
door opening/closing feature makes sure
the doors close all the way and are securely
sealed.
When opening and closing the door you
will notice a
stop
position. If the door is
opened past this
stop
point, the door will
remain open to allow you to load and
unload food more easily. When the door
is only partially open, it will automatically
close.
The resistance you feel at the
stop
position will be reduced as the door
is loaded with food.
When the door is only partially open,
it will automatically close.
Beyond this
stop
the door will stay open.
Door Alignment
Using a 7/16 socket wrench, turn the
door adjusting screw to the right to
raise the door, to the left to lower it.
(A nylon plug, imbedded in the
threads of the pin, prevents the pin
from turning unless a wrench is used.)
After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top of
the doors.
If doors are uneven, adjust the refrigerator
door.
7/16 Socket Wrench
Raise
On some models On some models
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
Содержание TURBOCOOL 23
Страница 87: ...Notas...
Страница 88: ...Notas...