GE Trivection JT930, Руководство пользователя

Страница: 41 / 48

41
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
www.GEAppliances.com
Problem Possible Causes What To Do
Arcing between metal Improper spacing between • See Using the Trivection ™ Oven section.
surfaces in oven while
metal surfaces and/or
speedcooking or aluminum foil.
defrosting
Display shows Wiring from house to oven • Contact installer or qualified electrician to check house
“Miswired detected”
is incorrect. wiring to oven.
Option not seen on the Option may be listed • Select MORE to see additional items.
display screen
on the next screen.
Hot air from oven When using the cooking • This is normal.
features, hot air will exit
the oven through the vent
located above the door.
Food does not bake or Oven controls improperly set. • See the Using traditional bake and roast section.
roast properly in the
Shelf position is incorrect
•
See the
Using traditional bake and roast
section.
oven
or the shelf is not level.
Incorrect cookware or
•
See the
Using traditional bake and roast
section.
cookware of improper
size being used.
Oven temperature needs • See the Adjust the oven temperature—Do it yourself!
adjustment. section.
Food does not broil Oven controls improperly set. • Make sure you select BROIL .
properly
Improper shelf position
•
See the
Broiling Guide.
being used.
Cookware not suited
•
Use the broiling pan and grid that came with your oven.
for broiling.
Aluminum foil used on the
•
See the
Using traditional bake and roast
section.
broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power
•
Preheat the broil element for 10 minutes.
(voltage) may be low.
• Broil for the longest period of time recommended in
the
Broiling Guide.
Clock and timer The clock is in the • See the Settings section for the oven clock.
do not work or
no clock mode.
display goes blank
Controls improperly set.
•
See the
Using the clock and lower oven timer
section.
A fuse in your home may be • Replace the fuse or reset the circuit breaker.
blown or the circuit breaker
tripped.