Specifications
Performance Data
Min
Typical
Max
Input Voltage (VDC)
23
24
25
Input Current (A)
-
-
3
Output Voltage (VDC)
3.1
-
3.8
Output Current (ADC)
-
-
4.0
Output Power (W)
-
-
30.4
Environmental Operating Temperature Range
-40°C
+25°C
+55°C*
Environmental Humidity (non-condensing)
0%
-
95%
Environmental Storage Temperature Range
-40°C
-
+85°C
Dimensions
9.5 in. x 1.7 in. x 1.2 in. (241 mm x 43.2 mm x 30.5 mm)
* Maximum case temperature is 85°C
NOTE:
Always use dip switch 6 for
Tetra Power White Strip.
NOTE:
Power off the LED control
module when setting the dip
switches.
NOTE:
Do not connect outputs in
series or parallel.
NOTE:
When installing power supply,
connect to the appropriate sized
building breaker or disconnect device for line and neutral connections, in accordance with local, state or country regulations.
NOTE:
The grounding and bonding of the power supply and overall sign shall be done in accordance with National Electric Code
(NEC) Article 600.
This product is intended to be used as a lamp control gear that is installed after the mains control switch.
Conforms to the following standards:
1 2 3
4 5 6
Dip Switch Setting Chart for Tetra Power White Strip
Dip
Switch
Setting
GECLPS5
GECLPS6
Notes
2 LEDs/ft.
(6 LEDs/m)
3 LEDs/ft.
(9 LEDs/m)
2 LEDs/ft.
(6 LEDs/m)
3 LEDs/ft.
(9 LEDs/m)
Dip Switch
6
28 ft.
(8.5m)
20 ft.
(6.1m)
7 ft.
(2.1m)
4.5 ft.
(1.4m)
No bank may
exceed 14
modules
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to
change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting is a business of the General Electric Company. © 2016 GE.
SIGN164 (Rev 11/15/16)
GE2026-2818
