GE T8 Скачать руководство пользователя страница 125

Страница: 125 / 349

Connectivity setup

Vivid T9/Vivid T8 – Basic Service Manual

3-45

5795591-100 English Rev. 3

3-9-2-2 To Add a Server in the Server Config List

(continued)

2. Add the server’s name in the

Server Name

field.

3. Add the server’s IP address in the

IP-Address

field.

4. Select

Check

to verify that the server is found.

This check is a network Ping. A symbol to the right for the Check
button indicates the result:

•

A green check mark next to the Check button indicates that
the IP-Address is found on the network.

•

A red check mark indicates that the IP-Address can’t be
found.

Possible reasons:

•

No network connection between the ultrasound system and
the server.

•

The wrong IP address.

3-9-2-3 To Modify the Setup for a Server in the List

NOTE:

Both the pre-defined servers and new servers can be modified.

Follow this procedure to modify the setup for a server in the
list:

1. Highlight the server you want to modify.
2. Select

Modify

3. Update the information as needed.
4. Select

Check

to verify that the server is found.

This check is a network Ping. A symbol to the right for the
Check button indicates the result:
•

A green check mark next to the Check button indicates
that the IP-Address is found on the network.

•

A red check mark indicates that the IP-Address can’t be
found.

Possible reasons:
•

No network connection between the ultrasound system
and the server.

•

The wrong IP address.

5. Select

to confirm your new settings, or

Cancel

to leave

without doing any changes.

Содержание T8






























































































































































































































































































































































Результаты поиска

Содержание T8

Отзывы:

Похожие инструкции для T8

Бренды по названию

Популярные бренды

GE T8, Базовое руководство по обслуживанию

Результаты поиска

Содержание T8

Отзывы:

Похожие инструкции для T8

Бренды по названию

Популярные бренды