Use This Problem Solver
PROBLEM
POSSIBLE CAUSE AND REMEDY
NOT
A fuse in your
be blown the circuit breaker tripped. Replace
or
COME
reset circuit breaker.
Unplug
your microwave oven, then plug it back in.
Make sure 3-prong plug on oven is fully
wall receptacle.
CONTROL PANEL
●
Door not securely closed.
YET OVEN
WILL
START
●
START must be
touched after entering cooking selection.
Another selection entered already oven and CLEAR/OFF not touched to
Make sure you have entered cooking time after touching TIME
or 11.
●
touched
Reset cooking program
touch
START.
Temperature probe not inserted properly or not being
used during Auto Roast or
Temp Cook.
●
Make sure you have entered a desired finished temperature after touching TEMP
COOK/HOLD.
Make sure you entered a code number
touching
functions.
EITHER
Cooking times may vary because of starting food temperature, food density
OVERCOOKED
OR
or
of foods in
Touch
COOK I or 11 and additional cooking
time for completion.
. Incorrect
entered. Check cookbook for recommended power
level, or changing levels during cooking if necessary.
●
Dish was not rotated, turned or stirred. Some dishes require specific
Check cookbook or recipe for instructions.
. Too many dishes in oven at same
Cooking time must be increased
when cooking more than
food item. Check cookbook for recommendation on
increased time.
Dish not completely covered as directed during Auto Cook.
●
Previous microwaving left humidity or moisture in oven, thus lessening the cooking
time in Auto Cook
●
Most vegetables are cooked to a crisp state during Auto Cook, just as in regular
microwaving, Therefore, it is recommended that you let the vegetables stand for up to
5 minutes depending on size and density of pieces.
Oven door was opened during
cycle of Auto Cook function.
. Probe not inserted properly into meat or dish when using Temp Cook or
Auto Roast functions. Check cookbook Auto Roast section of this book
for specific instructions.
32