GE Spacemaker JVM152J, Инструкция по использованию и уходу, Страница: 9 / 32

How to Use the Minute/Second
The Minute/Second Timer has
three timing functions:
. It operates as a minute timer.
●
It can be set to delay cooking.
●
It can be used as a hold setting
after defrosting.
The Minute/Second Timer operates
without microwave energy.
How to a 3-Minute
Phone Call
1. Touch TIMER pad.
The display shows “: O“ and
“ENTER TIME” flashes.
2. Touch number pads 3 and MIN
(for 3 minutes and no seconds).
Display shows
and
3. Touch START pad. Display
shows time counting down.
4. When time is up, oven signals,
flashes
and display shows
time of day.
Using a Holding
The Minute/Second Timer can also
be used to program a “holding time”
between microwave cooking functions.
The time
range from one second
to 99 minutes and 99 seconds. A
holding or standing time maybe
found in some of your own recipes
or in the cookbook supplied.
Programming Delayed
Cooking
To delay cooking up to 99 minutes
and 99 seconds, touch either the
TIME COOK I & II,
COOK/HOLD or AUTO ROAST
pad and enter cook time,
temperature or code. Touch
TIMER pad and enter
number of minutes to delay cooking.
When delaying
Cook/Hold
or Auto Roast cooking, be sure
probe is in food. Touch START
pad. Timer will count down to zero
and cooking will begin.
How to Defrost, Hold and
Cook
say you want to defrost a frozen
casserole for 15 minutes, hold for
Step 1: Take casserole from freezer
and place in oven.
Step 2: Touch TIME DEFROST
pad.
The display shows “: O“ and
“POWER “ENTER
TIME” flashes.
Step 3: Touch pads 1,5 and MIN
for a defrosting time of 15 minutes.
appears on display.
(Defrosting is automatically set on
power level 3 but can be changed
by touching the POWER LEVEL
pad and the desired power level.)
4: Set or hold
time
by TIMER pad.
The display shows “: O“ and
“ENTER TIME” flashes.
Step 5: Touch 1,0 and MIN to hold
for ten minutes.
appears
on display and “TIME” flashes.
I I
Step 6: Touch TIME COOK I & II
pad. The display shows “: O“ and
“POWER “ENTER COOK
Step 7: Touch 2,5 and MIN
for a cooking time of 25 minutes.
“COOK TIME” flashes and
and “POWER 10” appear
on display.
Step 8: Touch START pad.
TIME” and counting
down, show on display. As each
is automatically performed,
oven display shows instructions
entered and the function.
Step 9: When time is up, the oven
signals and display flashes
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A. The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes. Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in defrost and amount of
time. Then program the hold time
and the amount of cooking time. Be
sure to put the thawed dish in the
refrigerator promptly.
NOTE: Let foods remain at room
temperature only as long as safe.
Times will vary.
Q. I programmed my oven for
a specific defrosting time but it
defrosted longer than necessary.
What happened?
A. When instructions conflict,
the oven carries out the last
instruction. You may have set the
oven to defrost for 4 minutes, hold
for 2 minutes, and then defrost for
6 minutes. In this case, the oven
would defrost for 6 minutes and
hold for 2 minutes.
●
can be set to delay cooking.
A
●
It can be used as a hold setting
after defrosting.
The Minute/Second Timer operates
without microwave
How to a 3-Minute
Step 2: Touch DEFROST
Phone Call