manualshive.com logo in svg

GE Spacemaker GSM1860NSS, Руководство по установке

Поделиться
Скачать
GE Spacemaker GSM1860NSS Скачать руководство пользователя страница 10

Installation Instructions

9

The dishwasher must be secured to the countertop.
• Position the dishwasher so that the tub flange aligns

with the front face of the cabinet frame.

IMPORTANT: 

Check to be sure the dishwasher is

centered in the opening and there is no interference
with adjacent cabinets when opening or closing
the door.

Figure T

 STEP 11  SECURE DISHWASHER

TO CABINET

Figure S

IMPORTANT

 –

  

Drive screws

straight and flush. Protruding screw heads will
scratch the top of the control panel and can interfere
with door closing.

STEP 12  CONNECT WATER SUPPLY

Connect water supply line to 90° elbow.
• Slide compression nut, then ferrule over end of

water line.

• Insert water line into 90° elbow.
• Slide ferrule against elbow and secure with compres-

sion nut.

Ferrule

90

° 

Elbow

Compression Nut

Hot Water

Supply Line

IMPORTANT

 –

  

Check to be sure

that door spring does not rub or contact the fill hose or
water supply line. Test by opening and closing the door.
Re-route the lines if a rubbing noise or interference
occurs.

• Fasten the dishwasher to the underside of the

countertop with the 2 Phillips screws provided.

Align Tub

Flange

to Front

Face of

Cabinet

Frame

Содержание Spacemaker GSM1860NSS














Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды