EN
EN
Volume
CH
Wx
TV
8
7
BAND RADIO ON
- Turns on the radio, selects radio bands (AM/FM/TV)
MEMO RECALL
- Recalls preset radio stations.
OFF
- Turns off the unit.
MUTE
- Mutes sound.
/ -
- Adjusts volume
PLAY/PAUSE
- Starts and Pauses disc playback.
STOP
- Stops disc playback.
TRACK TUNE
- Tunes down radio frequency, selects the previous TV and
weather channel, selects previous CD disc tracks, searches backwards through a
track, counts backwards for setting clock and timer.
TRACK TUNE
- Tunes up radio frequency, selects the next TV and weather
channel, selects next CD disc tracks, searches forward through a track, counts
forwards for setting clock and timer.
CD MODE
- Selects among CD playback modes.
TIMER
- Turns timer on / off.
Inserting Batteries into Remote Control
The remote control must be inserted with 2 “AAA” batteries (not included)
prior use. Follow the steps below to ensure correct installation.
1. Slide the battery compartment lid open by pushing it in the direction shown
by the arrow on the back of the remote control.
2. Before inserting the batteries, observe the polarities (that is, + and -) of the
batteries, then relate the polarities to the engraved diagram inside the
battery compartment. Now insert the batteries.
3. After installation of the batteries, replace and fit the lid to cover the
batteries. You should hear a small “CLICK” sound when the lid is locked in
place.
General Controls
Radio frequency
unit
AM/PM time
indicator
Time/ countdown time /
radio frequency
Radio
band
In CD mode, shows
track number;
In tuner mode,
shows memory
location.
Playback modes:
Shuffle, repeat track,
repeat disc
Volume indicator
In clock setting mode
indicator
Countdown timer
indicator
Bass
indicator
Channel indicator
in TV mode
Weather Band
TV Band
Display
Setting the Time
The time display has a 12-hour format with AM
and PM indicator. To set the time:
1. Press
SET
to enter time setting mode.
The red Clock icon will appear on the
display.
2. To set clock time, use the
TRACK / SEARCH / TUNE
/ buttons
to select the correct time.
Press and hold to fast forward or fast reverse
clock time.
3. Press
SET
again to save clock time. The red
Clock icon will turn off.
Setting the Countdown Timer
1. Press
TIMER ON/OFF
to enter timer setting
mode.
The red
TIMER
icon will flash on the display.
2. To select countdown time, use the
TRACK / SEARCH / TUNE
/ buttons
to select the correct time.
Press and hold to fast forward or fast reverse
countdown time.
3. Press
TIMER ON/OFF
again to activate the
timer. The unit will beep twice to indicate
countdown has started.
The red
TIMER
icon will remain lit during
countdown.
4. Press
TIMER ON/OFF
to turn timer off at any
time or after it has sounded.
Note:
Note:
Note:
Note:
Note:
The radio or CD player is muted
when alarm turns on.
Tips:
Tips:
Tips:
Tips:
Tips:
In standby mode, press
TRACK /
TRACK /
TRACK /
TRACK /
TRACK /
SEARCH / TUNE
SEARCH / TUNE
SEARCH / TUNE
SEARCH / TUNE
SEARCH / TUNE
/ to show the
seconds counter.
Clock & Timer
