![background image](http://html1.mh-extra.com/html/ge/senographe-ds/senographe-ds_operators-manual_4259012141.webp)
GE Healthcare
Senographe DS Acquisition System
Revision 1
Operator Manual 5307907-3-S-1EN
Printing
13-print.fm
Page no. 141
Chapter 13
3-3
Printer properties
This window is accessed from either the Auto Print win-
dow, the Print Request window, or the Scrapbook Print
Manager panel. It displays the properties set for the
selected printer.
•
Format
and
Magnification type
cannot be changed
with the current Senographe DS release software.
•
Media type
:
Blue film
must be selected by default
with Senographe DS. Other choices will cause
printing errors.
•
Destination
:
Processor
must be selected by default
when using Senographe DS. Other choices will
incur printing errors.
•
Film orientation
:
Portrait
must be selected by
default when using Senographe DS. Other choices
will incur printing errors.
•
Film size can be toggled between 8 in x 10 in and
10 in x 12 in.
3-4
Printing status
The Printing status window displays the status of the
requested printing jobs.
•
If a job shows the
OK
comment, the exam has
successfully been sent to printing. If the job
shows the
ABORTED
comment, the job has
been aborted manually by the user from the
menu window buttons.
•
Click the
Queue
button to open the Filming
Queue window (see section
).
PRINTER 2
Printer properties
Done
Save
Media type:
Format
Standard
Destination
Film orientation
Processor
Portrait
Magnification type
Cubic
Film size
8 in x 10 in
Blue film
Queue
Done
Printing status
PRINTER 1 (10)
PRINTER 2 (11)
ABORTED
OK
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).