background image

8

/./&&

  Code Search

If your device does not respond after you have 
tried all the codes for your brand, or if your brand is 
not listed, try searching for your code by following 
these steps.

1.  Manually turn on the device (

TV

VCR

, etc.) to 

be controlled.

.  Press and hold the 

SETUP 

button 

until the red indicator stays on, then 
release the 

SETUP 

button.

3.  Press and quickly release the desired 

device button (

TV

VCR

, etc.). The red 

indicator blinks off once.

4.  Press the 

ON-OFF

 button repeatedly 

(up to 300 times) until the device 
to be controlled turns off. The red 
indicator blinks off with each button 
press.

Most users will store VCR codes under the 

VCR 

button, 

Cable codes under 

CABLE

, etc. If (for example) you 

want to store a VCR code under 

DVD/AUX

, first follow 

the procedure for Direct Code Entry (previous page) and 
press 

DVD/AUX 

in step  of Direct Code Entry, then 

enter ANY VCR code in step 3 of Direct Code Entry. 
Then follow the steps above for Code Search.

Note

:  Code Search starts from the currently stored 

three digit number under that mode. Sometimes the first 
code that “works” with your device may only allow limited 
functionality (e.g. the MENU button might not work). 
There may be a code that performs more functions. 
Continue the code search process until the best code 
is found.

.  Press and release 

ENTER 

to install 

     the code. 

TV

SETUP

ENTER

Содержание RM84930

















Отзывы: