10
11
You can choose the level you wish:
1.
Remove any food or object inside.
2
.
Release the bottom part by pulling it upward and towards you.
3.
Pull the upper part of the bin to completely remove it.
4.
To put it back, place theupper part on the right track and then
snap the bottom part in place. Make sure it is positioned in the
track properly and able to slide from side to side.
Wide bin
Bin to store all type of bottles or containers, it has 3 positions in
the inside door.
You can choose the position you wish:
1.
Remove any food or object inside.
2
.
Take the bin and pull it upwards to remove it.
3.
To put it back, you have to place it on the side tracks and push
it downwards into place.
Note:
this bin is not recommended for keeping bottles larger than
1 litre.
Bottle Bin
A bin to keep large or tall bottles (greater than 1 litre).
Can Rack
The Can rack can slide on the tracks located in the inner door and
can be placed wherever you wish, making a better use of door
spaces and capacity, including the freezer door.
To move the can rack:
1.
Remove cans.
2
.
Release the bottom part by pulling it upward and towards you.
3.
Pull the upper part of the rack to completely remove it.
4.
To put it back, place the upper part on the right track and then
snap the bottom part in place. Make sure it is positioned in the
track properly and able to slide from side to side.
Dairy Bin
The dairy bin has a revolving lid. Make sure to close it before
closing your refrigerator door.
1
2
3
4
5
6
Bottles Snugger
The bottles snugger helps to stop the movement of your bottles
within the bin. It can also be placed in the wide bin.
To remove it, slide it to the end of the bin, turn it and pull it
upwards.
Deli Fresh Drawer
This drawer is multipositional, though we recommend placing it on
one of the three top rows.
Egg Bin
The egg bin can be kept in the door bins or any other place in the
refrigerator.
Leveling Leg Covers
There are two covers for the leveling legs.
Follow the instructions to install them:
1.
Open the fresh food door.
2
.
To place the left cover (fig. 1 & 2), slide it into position at an
angle until it is fully inserted.
3.
Lower the cover until it latches onto the screw at the side.
4.
Repeat instructions for the right side (fig. 4, 5 & 6).
