Installation Instructions
PREPARE TO INSTALL THE RANGE
TOOLS YOU WILL NEED
MATERIALS YOU MAY NEED
Anchor Sleeves
Lag Bolts
Tin Snips
(For Anti-Tip Bracket Mounted on Concrete Floors Only)
3-Wire Cord
4‘ Long
4-Wire Cord
OR
4‘ Long
(UL Approved 40 AMP)
Adjustable Wrench
Level
1/4” Nut Driver
Phillips Screwdriver
Drill with 1/8” Bit
Pencil
Safety Glasses
Tape Measure
Pliers
Flat-blade
Screwdriver
PARTS INCLUDED
Anti-Tip Bracket Kit
REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to
remove packaging materials could result
in damage to the appliance.
1
PREPARE THE OPENING
•
See the illustration below for all rough-in and
spacing dimensions. These dimensions must
be met for safe use of your range.
•
The range may be placed with 0
″
clearance
at the back wall and 2
″
minimum clearance at
side walls of the range if the front edges of the
range side panels protrude beyond the cabinet
fronts at least 1/4
″
.
•
To eliminate the risk of burns or fire when
reaching over hot surface elements, cabinet
storage space above the cooktop should be
avoided. If cabinet storage space is to be
provided above the cooktop, the risk can be
reduced by installing a range hood that
protrudes at least 5
″
beyond the front of the
cabinets. Cabinets installed above a cooktop
may be no deeper than 13
″
.
Flooring under the range
Your range, like many other household items,
is heavy and can settle into soft floor coverings
such as cushioned vinyl or carpeting.
When moving the range on this type of
flooring, it should be installed on a 1/4
″
thick sheet of plywood (or similar material)
as follows:
When the floor covering ends at the front
of the range, the area that the range will
rest on should be built up with plywood
to the same level or higher than the floor
covering. This will allow the range to be
moved for cleaning or servicing.
2
Squeeze Connector
(For Conduit
Installations Only)
B
A
C
From combustible
walls above cooking
surface
C
Models
A
B
(recommended)
D
20
″
Wide
20
″
20
3
⁄
8
″
2
″
39
3
⁄
8
″
24
″
Wide
24
″
24
3
⁄
8
″
2
″
40
1
⁄
2
″
36
″
D
(depth
with door
open)
Surface
mount
outlet
39
3
⁄
4
″
height
7
″
30
″
min.
24
″
18
″
min.
13
″
max.
36
″
max.
26
″
from
wall to front of
control panel
14
