![GE Profile PSB42LSRBV Скачать руководство пользователя страница 30](http://html.mh-extra.com/html/ge/profile-psb42lsrbv/profile-psb42lsrbv_owners-manual-and-installation-instructions_2203834030.webp)
10 INSTALL GRILLE PANEL
•
Raise the grille panel to the stop position.
•
Remove 4 screws on bottom trim; retain
all screws.
•
Remove bottom trim.
•
Slide panel over the metal backer panel
and under the trim.
•
If necessary, tap with a wood block until
panel slips under the top trim piece.
•
Reassemble bottom trim. Tighten screws.
Raise
Grille
Panel
8 SECURE REFRIGERATOR
TO CABINETS
Whenever possible, perform this step for
anti-tip security.
The refrigerator must be secured to prevent
tipping.
•
Raise the grille panel to access case trim.
•
Drive a screw through the trim and into the
adjacent cabinet using holes provided.
•
Follow the same procedure on the opposite
side.
Drive Screws
Through Case Trim Into
Adjacent Cabinets
Raise Grille Panel
to Stop Position
9 ADJUST DOOR SWING
NOTE:
This refrigerator has a 2-position door
stop. When space does not allow the door to
swing open fully to 130°, you may change the
door swing to a 90° opening.
SKIP THIS STEP IF DOOR OPENING IS
SATISFACTORY FOR YOUR INSTALLATION
SITUATION.
•
Open the door to view the bottom hinge.
Note the door stop pin location. The pin is
factory installed in the 130° position.
•
Partially close the door. From above, use a
flat-head screwdriver to unscrew the door
stop pin and reinstall into the 90° position.
90
°
130
°
Hinge
Door
Interior
Installation Instructions
30
Содержание Profile PSB42LSRBV
Страница 84: ...Soutien au consommateur Conseils de dépannage Fonctionnement Mesures de sécurité Installation 84 Notes ...
Страница 85: ...85 Notes Soutien au consommateur Conseils de dépannage Fonctionnement Mesures de sécurité Installation ...
Страница 86: ...Soutien au consommateur Conseils de dépannage Fonctionnement Mesures de sécurité Installation 86 Notes ...