GE Profile PP945, Техническое обслуживание руководство

Страница: 7 / 27

– 7 –
Dimensions and Clearances
The following MINIMUM clearance dimensions must
be maintained.
13
″
MAX. Depth of uprotected
overhead cabinets
30
″
MIN.
Clearance from
countertop to
unprotected
overhead
surface
2
″
MIN. Clearance
from cutout to
side wall on the
left of the unit
15
″
MIN. Height
from countertop
to nearest
cabinet on either
side of unit
2
″
MIN.
Clearance from
cutout to side
wall on the right
of the unit
If a 30-inch clearance between the cooking
surface and overhead combustible materials or
metal cabinets cannot be maintained, a minimum
clearance of 24 inches is required and the
underside of the cabinets above the cooktop must
be protected with not less than ¼-in. insulating
millboard covered with sheet metal not less than
0.0122 inches thick.
20-7/8
″
(21
″
SS)
Depth on Monogram ZEU36K
is 21-1/4
″
@ center.
33-3/4
″
Cooktop
36
″
(36-1/8
″
SS)
18-7/8
″
3-1/4
″
Front
4-5/8
″
Rear
at the conduit
location
6-1/4
″
Rear
on Model PP975
& PP980
Overall Cooktop Dimensions - 30-in. Models
33-3/4
″
Cooktop
29-3/4
″
(29-7/8
″
SS)
18-7/8
″
3-1/4
″
Front
4-5/8
″
Rear
at the conduit
location
6-1/4
″
Rear
on Model PP945
& PP950
21-3/8
″
(21-1/2
″
SS)
5
″
Min.
Vertical Clearance
There must be 5 inches minimum vertical clearance
between the cooktop bottom and any combustible
surfaces.
Make sure the wall coverings, countertop and
cabinets around the cooktop can withstand heat up
to 200°F (93°C) generated by the cooktop.
Install junction box so
that it can be reached
through the front of
the cabinet.
16
″
Min.
Note: The junction box must be located where
it will allow considerable slack in the conduit for
serviceability.
Overall Cooktop Dimensions - 36-in. Models
W all covering,
cabinets and
countertop must
withstand heat
up to 200°F ( 93° C ).