GE Profile PCF23MGW, Руководство пользователя и инструкция по установке

Страница: 7 / 132

7
Empty the pan. Place the Chill/Thaw
tray in the pan. Place the items on the
tray and close the pan completely.
LCD Models:
Access by: Home > Options >
Refrigerator Options >
CustomCool
Pan
Non-LCD Models:
Select the ExpressThaw ™ , ExpressChill ™
or
SelectTemp ™
pad. The display and
SET light will come on. Tap the pad
until the light appears next to the
desired setting.
Use the following chart to determine
the best setting to use.
■
On some models, ExpressChill has
only one 45 minute setting.
■
To stop a feature before it is finished:
For LCD Models:
Go into that feature’s menu and press
the
OFF button.
For Non-LCD Models:
Tap that feature’s pad until no
options are selected and the display
is off.
■
During
ExpressThaw
and
ExpressChill
, the display on the
controls will count down the time
in the cycle (on some models).
■
After the
ExpressThaw
cycle is
complete, the pan will reset to the
MEAT
setting (32°F [0°C]) to help
preserve thawed items until they are
used.
■
The displayed actual temperature of
the
CustomCool
pan may vary slightly
from the
SET
temperature based on
usage and operating environment.
NOTE: For food safety reasons, it is recommended
that foods be wrapped in plastic wrap when using
ExpressThaw . This will help contain meat juices
and improve thawing performance.
About CustomCool ™ .
(on some models)
ge.com
The
CustomCool ™
feature is used to quickly
chill items, thaw items or hold the pan at a
specific temperature. This feature is a
system of dampers, a fan, a temperature
thermistor and a heater.
The pan is tightly sealed to prevent
temperature fluctuations in the rest of the
refrigerator. The controls for this pan are
located at the top of the refrigerator with
the temperature controls, or on the
dispenser with the temperature controls.
How to Use
How it Works
ExpressThaw ™
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in the
unlock position.
Place the sides of the drawer into the
drawer supports, making sure the swing
locks fit on the drawer slots.
Lock all four swing locks by rotating
them to the lock position.
How to Remove and Replace the Drawer
ExpressChill ™
Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
On LCD
models