Problem
Possible Causes
What To Do
Bottle feels warm
Water system overfilled. Water
•
Dispense cold water until air is released into the bottle.
is boiling in the hot tank and
bubbling up into the bottle.
Water dispenser is noisy
Water dispenser is uneven.
•
Make sure the water is installed on a level floor strong
enough to support it when fully loaded.
Bottle making a gurgling noise
•
This is normal.
as water fills the tanks.
Hot water boiling sound.
•
This is normal.
Dispenser or water bottle shakes
•
This is normal.
when the cooling system cycles off.
Particles floating in water
Water has high mineral content.
•
Find a water source with lower hardness.
Foul odor in air around
Hot water tank is empty or
•
Press the hot dispenser button until water flows to remove
dispenser
not completely full.
air from the hot tank.
Chiller does not operate
Water dispenser is unplugged.
•
Push the plug completely into the outlet.
The fuse is blown/circuit
•
Replace fuse or reset the breaker.
breaker is tripped.
Vibration or rattling
Water dispenser is on
•
Use shims to level the unit.
(slight vibration
an uneven surface.
is normal)
Compressor/motor
Often occurs when large amounts
•
This is normal.
operates (snowflake icon
of food are placed in cooler.
in motion) for long periods
Door left open.
•
Check to see if package is holding door open.
or cycles
Hot weather or frequent
•
This is normal.
door openings.
Normal when unit
•
Wait 24 hours for the unit to completely cool down.
is first plugged in.
Not enough clearance
•
Make sure there is enough air circulation around the unit.
from the wall.
Water system overfilled.
•
Dispense water from the cold faucet until air is released
into the bottle.
Chiller compartment
Door left open.
•
Check to see if package is holding door open.
too warm
Compartment/cold water
Low ambient temperature.
•
Place units in room temperature environment.
too cold/frozen
Chiller compartment
Foods transmitting odor
•
Foods with strong odors should be tightly wrapped.
has odor
to chiller.
•
Keep an open box of baking soda in the unit; replace every
three months.
Interior needs cleaning.
•
See
Care and cleaning
.
Moisture forms on outside
Not unusual during
•
Wipe surface dry.
of chiller compartment
periods of high humidity
•
Operate unit in temperature- and humidity-controlled
and/or temperature.
location.
• Place unit in tray to contain moisture accumulation.
Moisture collects inside
Too frequent or too long
•
Minimize time door is open.
chiller compartment
door openings.
•
Wipe surface dry.
(in humid weather, air
•
Empty internal drip tray.
carries moisture into
•
Operate unit in temperature- and humidity-controlled
chiller compartment
location.
when door is opened)
• Place unit in tray to contain moisture accumulation.
Troubleshooting Tips.
8
