
OPERATING INSTRUCTIONS
NORMAL
WASH
LIGHT
WASH
TEMP
BOOST
HEATED
DRY
ENERGY OPTIONS
CYCLES
ENERGY
SAVER
CHINA
CRYSTAL
POT-
SCRUBBER
SHORT WASH
START DELAY
(HRS)
PLATE WARMER
(PRESS HEATED DRY)
OFF
START
8
6
4
2
10
STATUS
CYCLE
ON
(PRESS NORMAL WASH)
RINSE & HOLD
(PRESS NORMAL WASH
& ENERGY SAVER)
Select Cycle/Option
Before You Begin
Starting the Cycle
2
3
1
2
2
3
Your dishwasher is designed to give maximum
performance on loads with normal and heavy soils.
Features and appearance may vary.
Cycle Descriptions
POTSCRUBBER
For heavily soiled dishes or cookware with dried-on or
baked-on soils. Everyday dishes may be included. This
cycle will not remove burned-on foods.
NORMAL WASH
For loads of everyday dishes, glasses and cookware
with medium soils. Designed to yield high performance
on average soils.
NOTE: Many dishes have lighter soil than normal.
Choosing a cycle other than NORMAL WASH will
save water.
LIGHT WASH
For dishes with light soils.
CHINA CRYSTAL
For lightly soiled china and crystal. Water is aerated for
a gentle wash.
SHORT WASH
For quickly washing loads of everyday dishes with
medium soils that have not dried on, such as loads
consisting mostly of glasses.
RINSE & HOLD
For rinsing partial loads that will be washed later. Press
NORMAL WASH cycle and ENERGY SAVER option.
Do not use detergent.
PLATE WARMER
For warming clean dishes and serving plates. This
cycle will take approximately 31 minutes.
• Load dishware. (See Loading
section.)
• Make sure the Dial is at the OFF
position and the CYCLE ON light
is off.
• Add detergent. (See Detergent
Dispensers and Detergent Guide
sections.)
• Check rinse agent level. (See Rinse
Agent section.)
NOTE: If dishwasher drains into a
garbage disposal, operate the disposal
until it is empty before starting the
dishwasher.
*If you want to use a cycle on the
Dial go to the Using the Cycles on
the Dial section.
• Latch the door.
• Select your desired cycle and
energy options.
NOTE: The light over the pads
comes ON when pressed, to indicate
the cycle/option that has been
selected. Press pad firmly until the
light comes on. These lights remain
on while the door is latched.
Turning the Dial to START will
begin the cycle immediately.
NOTE: To obtain the benefits of a
complete cycle, be careful that you
do not turn the Dial any farther than
is necessary to start the dishwasher.
There is a time delay between start-
up and water fill so you will not hear
any wash action right away.
4
Содержание Profile GSD4310
Страница 16: ...16 NOTES ...
Страница 17: ...17 NOTES ...