– 10 –
Installation
Sales/Demo Mode
The demo kit model number is PB920 Demo Kit - Electric Ranges with Backlit Touchkeys. The cord is available
as Pub 3-A029. There is no change to the cord; the only difference is how the cord is attached to this model
range.
The following features are disabled in Demo Mode:
Oven heating elements
•
Surface burners
•
Convection fan
•
Door latch motors
•
Caution: This kit must be installed by qualifi ed personnel only.
To install the demo kit:
Disconnect the ground strap from the range body (the strap must not contact the range structure or the
1.
ground wire).
Connect the green wire to the range body using the grounding screw.
2.
Connect the single black wire with ribs or the gray stripe wire to the left terminal of the junction block.
3.
Connect the larger of the two smooth black wires to the right terminal of the junction block and the
4.
smaller of the two smooth black wires to the center terminal.
The cord is to be plugged into a 120V, 60 Hz polarized and grounded outlet.
5.
To remove the demo kit:
Reverse the above process, ensuring that the ground strap is reconnected to the range body using the
grounding screw.
JUNCTION BLOCK
GROUND
STRAP
(MUST NOT
TOUCH RANGE
BODY)
GREEN WIRE
BLACK WITH RIBS OR
GRAY STRIPE WIRE
BLACK WIRE
Note: The black wire with ribs or gray
stripe is neutral
