GE PACSystems RX7i Скачать руководство пользователя страница 60

Страница: 60 / 276

Chapter 4. Configuration

GFK-2224Q

January 2017

4.2

Rack-based and RX7i Embedded Interfaces

The configuration process for the rack-based and RX7i embedded Ethernet interfaces includes:

▪

Assigning a temporary IP address for initial network operation, such as connecting the programmer to

download the hardware configuration.

▪

Configuring the characteristics of the Ethernet interface.

▪

Configuring Ethernet Global Data (if used).

▪

(Optional, not required for most systems). Setting up the RS-232 port for Local Station Manager operation.

This is part of the basic Ethernet Interface configuration.

▪

(Optional, not required for most systems). Configuring advanced parameters. This requires creating a

separate ASCII parameter file that is stored to the PLC with the hardware configuration. The Ethernet

Interface has a set of default Advanced User Parameter values that should only be changed in exceptional

circumstances by experienced users. The Advanced User Parameters definitions and configuration are

described in Appendix A.

▪

(Optional) Setting up the PLC for Modbus/TCP Server operation. See Chapter 8 for information about

configuring Modbus/TCP Server operation.

This chapter discusses only the configuration of the PACSystems Ethernet Interface. Information about overall

system configuration is available in other PACSystems documentation and in the Logic Developer online help.

Ethernet Configuration Data

The PACSystems PLC is configured exclusively by the Machine Edition PLC Logic Developer-PLC programmer.

The Programmer can be connected over the Ethernet network. For initial programmer connection, an initial IP

address must be manually assigned to the Ethernet interface as described next in this chapter. The

PACSystems PLC does not support auto-configuration.

Generating / Storing / Loading the Configuration

The PACSystems Ethernet interfaces use several types of configuration data: Ethernet Configuration, optional

Ethernet Global Data Configuration, and optional Advanced User Parameter (AUP) Configuration. These

configuration parameters are generated at the programmer, stored from the programmer to the PLC CPU as

part of the hardware configuration Store sequence and may be loaded from the PLC CPU into the programmer

as part of the Configuration Load sequence. The optional AUP file must be manually generated with a text

editor and then imported into the programmer. The programmer then stores any AUP files to the PLC within the

Configuration Store operation. Once stored to the PLC, the PACSystems main CPU maintains the configuration

data over power cycles.

Backup Configuration Data

The PACSystems Ethernet interface saves a backup copy of the most recent Ethernet Configuration and AUP

Configuration in non-volatile memory for use when the PLC is cleared. (Ethernet Global Data configuration is

maintained only in the PLC CPU.) The PACSystems Ethernet interfaces maintain the backup configuration data

in nonvolatile memory without battery power. (A PLC Configuration Clear does not affect the backup

configuration data in the Ethernet interface.)
When the PLC configuration was not stored from the programmer, the Ethernet interface uses its backup

configuration data if valid. If that data is invalid or has never been configured, factory default configuration

values are used.

Locally Edited Configuration Data

If the PLC configuration was not stored from the programmer, the CHSOSW and CHPARM Station Manager

commands can be used to locally edit Ethernet configuration or AUP configuration data. These Station

Manager commands are not active if the PLC configuration has been stored from the programmer.

Содержание PACSystems RX7i





















































































































































































































































































Результаты поиска

Содержание PACSystems RX7i

Отзывы:

Похожие инструкции для PACSystems RX7i

Бренды по названию

Популярные бренды

GE PACSystems RX7i, Руководство пользователя

Результаты поиска

Содержание PACSystems RX7i

Отзывы:

Похожие инструкции для PACSystems RX7i

Бренды по названию

Популярные бренды