GE NX-148E - Security NetworX LCD Keypad Скачать руководство пользователя страница 5

Страница: 5 / 30

NX-148E LCD Keypad

GLOSSARY OF TERMS

Abort Delay

An option that allows a delay in reporting to the central
station.

Authority Level:

The level of access an individual has when using an alarm
panel.

Central Station:

Location where alarm data is sent during an alarm report

Chime Feature:

An option that allows the keypad to sound a ding-dong
whenever an entry/exit door is opened.

Codes:

Can be either User Codes (relating to a person) or Function
Codes (a toggle switch to turn specific functions on/off).

NOTE: A system may have either four (4) digit codes or six
(6) digit codes, but not a mixture of the two.

Duress Code:

An option that allows a special code to be sent to the central
station that indicates the alarm system is being operated
under duress.

Forced Arming:

An option that allows the system to be turned on (ARMED)

with one or more zones open. A system that is ready to be
“force armed” will flash the

ready light

NOTE: Those zones

that are not ready will not create an alarm.

Function Code:

A Function Code is either a four (4) or six (6) digit code that has
been programmed by the installer to operate a device.

Group Bypass:

An option that allows the user to bypass multiple zones with a
single operation.

Instant/Delay:

An option that allows an instant alarm condition for Entry/Exit
doors, or grants a delay to allow someone to enter/exit the
building without an alarm or before entering a user code to
disarm.

Master Code:

A master arm/disarm code that can program other user
codes.

Partitioned System:

A system divided into multiple areas in which its own user or
users control each area.

Perimeter:

The outer edge of the protected area.

Quick Arm:

An option that allows you to turn on (ARM) the security
system by pressing either the [

STAY

] or [

EXIT

] key on the

keypad control (for ARMING only) as programmed by the
installing company.

User Code:

A four (4) or six (6) digit entry used to arm or disarm the
system.

Содержание NX-148E - Security NetworX LCD Keypad































Результаты поиска

Содержание NX-148E - Security NetworX LCD Keypad

Отзывы:

Похожие инструкции для NX-148E - Security NetworX LCD Keypad

Бренды по названию

Популярные бренды

GE NX-148E - Security NetworX LCD Keypad, Руководство пользователя

Результаты поиска

Содержание NX-148E - Security NetworX LCD Keypad

Отзывы:

Похожие инструкции для NX-148E - Security NetworX LCD Keypad

Бренды по названию

Популярные бренды