GE Multilink ML3000, Инструкция по эксплуатации

Страница: 30 / 356

1–16 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
INTRODUCTION CHAPTER 1: INTRODUCTION
The following example deletes the user “peter”:
ML3000(user)##
delete user=peter
Confirm User Deletion(Y/N):
Y
User successfully deleted
ML3000(user)##
The syntax to modify a password is shown below:
passwd user=<name>
The following example changes the password for user “peter”.
ML3000(user)##
passwd user=peter
Enter New Password:******
Confirm New Password :******
Password has been modified successfully
ML3000(user)##
The syntax to modify the privilege level for a specific user is shown below:
chlevel user=<name> level=<number>
The following example modifies the privilege level of user “peter” to Operator privileges.
ML3000(user)##
chlevel user=peter level=1
Access Permission Modified
ML3000(user)##
The syntax to set the access privileges for telnet and Web services is shown below:
useraccess user=<name> service=<telnet|web> <enable|disable>
The following example sets the access privileges for telnet and Web services.
ML3000(user)##
useraccess user=peter service=telnet disable
Telnet Access Disabled.
1.5.9 Help
Typing the
help
command lists the commands you can execute at the current privilege
level. For example, typing
help
at the Operator level shows the following:
ML3000 >
help
logout ping set
terminal telnet walkmib
Contextless Commands:
! ? clear
enable exit help
show whoami
alarm
ML3000 >
Help for any command that is available at the current context level can be viewed by
typing help followed by enough of the command string to identify the command. The
following syntax applies:
help <command string>