GE Multilin W650 Скачать руководство пользователя страница 266

Страница: 266 / 622

5-126

W650 Wind Generator Protection System

GEK-113032A

5.9 LOGIC CONFIGURATION (PLC EDITOR)

5 SETTINGS

5.9.3 MAIN MENU

The PLC Editor tool

(Setpoint > Logic Configuration )

provides a main menu with different submenus (File, Project, Edit,

Run, View, and Window) that allows the user to built customized logic for the W650 devices.

5.9.3.1 FILE MENU

The FILE menu includes the following options:

New Project

allows to create a new project that will include the files of the logic configuration

Open Project

opens an existing project.

Close Project

closes the currently open project.

Save Project and Save Project as

: saves the open project.

Save Automatic Function

& Save Automatic Function As

Saves the file of the active project.

Library

Gives access to the libraries sub-menus, where new libraries can be created and

existing ones can be modified and saved.

Print

Prints the active configuration file.

Preview

Preview of the document before printing.

Exit

The system closes all open projects and exits the application.

5.9.3.2 PROJECT MENU

The Project menu includes the following options:

Project Explorer:

Displays a window where we see a tree structure with the files contained in the

project.

Insert library

Inserts a library in the active automatic function.

5.9.3.3 EDIT MENU

The Edit menu includes the following options:

Undo

Undoes the last modification in the active function.

Redo

Remakes the last modification.

Cut

Cuts one or more logic operations.

Copy

Copies one or more logic operations.

Paste

Pastes one or more logic operations.

Find

Looks for a logic operation in the project.

Copy as Bitmap

Copies the active automatic function to the clipboard in picture format.

View Clipboard

Launches the clipboard viewer application.

5.9.3.4 RUN MENU

The RUN menu includes the following options:

Configuration:

Not valid in the current application (for analog operations still not available)

Compile:

Compiles the configuration functions to generate the equations that will be interpreted
by the 650 PLC.

Send Equations to Relay

Содержание Multilin W650















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Multilin W650

Отзывы:

Похожие инструкции для Multilin W650

Бренды по названию

Популярные бренды

GE Multilin W650, Инструкция по эксплуатации

Результаты поиска

Содержание Multilin W650

Отзывы:

Похожие инструкции для Multilin W650

Бренды по названию

Популярные бренды