Page 11 of 15
GE Grid Solutions
Grid Automation
Avda. Pinoa, 10
48170 Zamudio
SPAIN
T +34 94 485 88 00
F +34 94 485 88 45
In general, the relay may be installed in the front of the panel, assembled together with the
graphical control panel (GCP) and a short 2 inches RJ45 cable that connects the main unit with the
display.
It may also be installed in a DIN rail in the bottom of the panel.
It may also be fixed by screws at the end of the panel. When installing the relay in the back of the
panel, remove case tabs in order to have the relay flat and guarantee good connection.
Fig. 11 Case tabs.
Fig. 12 Relay case with the tabs already removed.
