GE MP100 Series, Руководство по обслуживанию

Страница: 205 / 314

Checkout procedures
2026419-033E CIC Pro™ 7-19
Check processor fan status
1. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7 .
2. Click Diagnostics > Preventative Maintenance > Fan Test .
3. On the Fan Testing screen, verify the following values are within acceptable
limits:
Check video function and status of video card and drivers
NOTE
The CIC Pro center application must be stopped before conducting this test.
CAUTION
During shutdown or while in administrator mode, beds displayed by
the CIC Pro center will be unmonitored if not displayed by a
different CIC Pro center.
1. Log on to the CIC Pro center as Administrator on page 4-3 .
2. From the desktop, launch Internet Explorer.
3. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7 .
4. Click Diagnostics > Preventative Maintenance > Video Test .
Property Value Acceptable limits
Chassis Fan 1
Speed
Real-time speed of fan for CIC Pro
center’s CPU. 2700 — 4000 RPM
Chassis Fan 2
Speed
Real-time speed of fan for CIC Pro
center’s chassis. 1700 — 4000 RPM