GE MP100 Series, Руководство по обслуживанию

Страница: 178 / 314

6-84 CIC Pro™ 2026419-033E
Configuration
3. Repeat the configuration starting with step 5 . See Configure the keyboard and
mouse group on page 6-80.
Divide a mouse and keyboard group into two groups
Preliminary steps
At any time, you may divide a single mouse and keyboard group into two groups
(e.g., Group 1 and Group 2).
1. Note the computer names of the CIC Pro centers located in the group (e.g., A, B,
C, D, E, and F).
2. Determine how you want to divide the single CIC Pro center group into two
groups (e.g., Group 1: A, B and C and Group 2: D, E and F).
3. Go to CIC Pro center A.
4. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7 .
5. Click Configuration > MultiKM and start the MultiKM application.
6. On the Multimouse application window, click Configure .
Create Group 1
NOTE
Because the primary CIC Pro center is the device that has the mouse and
keyboard connected to it, the computer name of this device will not be displayed
in the
Other computers list. This prevents you from accidentally removing the
only device with the mouse and keyboard from a keyboard and mouse group.
1. On the Change Configuration window, remove the names of the CIC Pro centers
you do not want included in Group 1:
a. Under Other Computers , click the computer name of the CIC Pro center you
want to remove from the group (e.g., D).