GE Monogram ZV830, Руководство по установке

Страница: 14 / 60

Installation Instructions
14
INSTALLATION—RECIRCULATING
DUCTWORK, WIRING LOCATIONS
• Determine the exact location of the vent hood.
• Locate the template packed with the literature.
• Measure 36
″
from the floor to the top of the cooking
surface. Add hood installation height determined on
page 7. Mark that location.
• Tape the template in position along the penciled line.
CHECK TO BE SURE THE TEMPLATE IS LEVEL.
• Use a level to draw a line straight up, from
the centerline on the template to the ceiling.
HOUSE WIRING LOCATION:
• The junction box is located on the top left side
of the hood.
• Wiring should enter the back wall at least 18
″
above the bottom of the hood, and within 5-1/2
″
of the centerline.
Installation Height
Align Bottom Edge With
Pencil Line Indicating
Bottom of Hood
REAR WALL
MOUNTING TEMPLATE
49-80514
10/07
JR
Printed
in
Mexico
15-7/16
″
15-7/16
″
10-1/16
″
C
L
1-1/4
″
1-1/4
″
9-7/16
″
9-7/16
″
TOP
MOUNTING
HOLE
DRILL 1/8 ″
PILOT HOLE
TOP
MOUNTING
HOLE
DRILL 1/8 ″
PILOT HOLE
BOTTOM
MOUNTING
HOLE BOTTOM
MOUNTING
HOLE
NOTE: Top
mounting
screws MUST
engage wood
support.
NOTE: Top
mounting
screws MUST
engage wood
support.
Installation Height
Align Bottom Edge With
Pencil Line Indicating
Bottom of Hood
INSTALL FRAMING
FOR HOOD SUPPORT
IMPORTANT:
Framing must be capable
of supporting 100 lbs.
If drywall is present, mark the screw hole locations for
the top mounting brackets. Remove the template.
• Cut away enough drywall to expose 2 vertical studs
at the bracket location indicated on the template.
• Install a horizontal support at least 1
″
x 6
″
between two wall studs at the mounting screw
location.
The horizontal support must be flush with
the room side of the studs. Use cleats behind both
sides of the support to secure to wall studs.
IMPORTANT: Reinstall drywall for an even mounting
surface.
1
Centerline of
Installation
Space
8" Min. Opening for Ductwork
View From Rear
Cleats
1" x 6" Min.
Mounting
Support
Centerline of
installation
space
View from rear
cleats
1” x 6” min.
mounting
support
Ceiling
House Wiring
Location
C
L
5-1/2”
18”
Min.