background image

Revised 7/97

Monogram.

UL

R

Listed by
Underwriters
Laboratories

For answers to your Monogram,

®

GE Profile,

GE, Hotpoint and RCA appliance questions, 
call GE Answer Center

®

service, 800.626.2000.

ZGU36N4RYSS—36" Professional Gas Cooktop

Dimensions and Specifications (in inches)

This cooktop is factory set for natural gas and has 4 gas burners 
and a grill.

Liquid Propane Gas Model Also Available:

ZGU36L4RYSS–4 gas burners and grill.

Installation Options:

This cooktop can be installed in standard 24" or deeper 25" cabinets.

• In 24" deep cabinets, the front of the cooktop will project

approximately 1-7/8" beyond the front of the countertop.

• In 25" deep cabinets, the cooktop will be flush with the front of the

countertop

• The stainless surface of the cooktop will be 1/2" higher than adjacent

countertop.

Accessory Requirements:

All models 

require

the installation of a backguard. A backguard should

be ordered at the same time as the cooktop. Both should be 
on site before cabinetry has been installed.

Order one backguard:

ZXC1B36YSS–1-1/2" high backguard (required for island installations)
ZXC12B36YSS–12" high backguard
ZXC22B36YSS–22" high backguard with warming shelf (2 piece)

1/2" Above Adjacent
Countertops.

Front Projects Outward as Shown
From Standard Depth Cabinets.

Cooktop

ZXC22B36YSS

ZXC12B36YSS

ZXC1B36YSS

26-5/8"

12"

1/2"

8-7/16"

Countertop 
Level

22-3/4"

23-1/4"

3" to Center Line

of Gas Inlet

2-1/2"

Cabinet Face - Projecting Control Panel

Cabinet Face - Flush Control Panel

1/2"

Low Back

21-1/4"

High

Back

1/2" Above Adjacent
Countertops.

Front Flush With Cabinets - a Minimum
of 25-3/4" Cabinet Depth Required

Flush With Cabinet Front

Cooktop

Содержание Monogram ZGU36L4RYSS

Страница 1: ...e stainless surface of the cooktop will be 1 2 higher than adjacent countertop Accessory Requirements All models require the installation of a backguard A backguard should be ordered at the same time as the cooktop Both should be on site before cabinetry has been installed Order one backguard ZXC1B36YSS 1 1 2 high backguard required for island installations ZXC12B36YSS 12 high backguard ZXC22B36YS...

Страница 2: ...ange should have 18 minimum clearance between countertop and cabinet bottom Clearance between cooktop and side wall or combustible material must be at least 12 on each side This cooktop requires 8 free space below the countertop If the cooktop is installed in an island Allow 12 min clearance at the back to combustible materials Allow 36 min above the cooking surface to combustible materials Instal...

Страница 3: ...ny rough edges on the countertop before installing cooktop Formica countertop edges must be finished The countertop must be strong enough to support the weight of the cooktop Support cleats can be secured to cabinet sides OR build a support deck or box inside the cabinet which will support the weight of the cooktop Build the support box using a solid material cut a 5 x 5 square in the left rear co...

Страница 4: ...nless Steel Model Natural Gas 36 Gas Cooktop Four 15 000 500 BTU Dual Ring Gas Burners 18 000 BTU Grill Cast Iron Porcelanized Burner Grates Stainless Steel Slide Out Drip Tray Electronic Ignition with Automatic Re Ignition Commercial Style Controls Stainless Steel Grill Cover Model ZGU36N4RYSS Natural Gas Model ZGU36L4RYSS Liquid Propane Gas ...

Отзывы: