Custom Settings Chart
Using Your Cooktop
Radiant Cooktop
Custom
Settings
1. Press and hold
All Off
pad for 3 seconds, then
immediately press and hold the
Timer Select
pad for 3 seconds to enter custom settings.
Those two pads must be pressed within 30
seconds. Any other pad will cancel mode.
2. “C - -” appears on display. To navigate through
the Custom Settings, use the
(up) or
V
(down)
pads. If
(up) is selected the display cycle
starts at “C01”. If
V
(down) is selected, the
display cycle starts at “C62”.
3. To activate a new Custom Setting the user will
touch and hold the
Timer Select
pad for 3 sec.
Only ONE of the Custom Setting Choices can
be activated for each Custom Setting. The red
“On” LED will turn on and a sound will go off
once a new custom setting is activated.
4. The cooktop will exit Custom Settings if it is
inactive for 3 minutes.
5. To exit Custom Settings and save any changes,
touch and hold the
All Off
pad for 3 seconds.
Custom Settings
Custom Setting Choices
C0 (Factory Settings)
C01 -
Factory Reset (Clears customized settings and restores defaults)
C02 -
Custom settings activated (Not visible unless any other custom setting is selected. And
automatically on when any other custom setting is selected. Not selectable by user.)
C1 (Control Lock)
C11 -
Standard Lock (ie; Only on when lock button pressed for 3 seconds.) If using a timer,
Control Lock is unavailable.
C12 -
Auto Lock (ie; Engages after cooktop has been in standby mode for 10 minutes.) The
unit should be completely off to go into Auto Lock.
C2 (LED light level)
C21 -
Full illumination
C22 -
Medium illumination
C23 -
Lowest illumination
C3 (Button Loudness)
C31 -
All sounds activated at 100% (For alarm sounds, 100% = Whatever level is set in c4.)
C32 -
Button sound level reduced by 50%, Alarm sounds at 100%
C33 -
Button sounds deactivated, Alarm sounds activated at 100%
C4 (Timer Alarm
Loudness)
C41 -
High
C42 -
Low
C5 (Timer Alarm
Duration)
C51 -
Indefinite (ie; alarm continues until cancelled by user).
C52 -
Alarm sounds for 60 seconds.
C53 -
Alarm sounds for 30 seconds.
C54 -
Alarm sounds for 15 seconds.
C6 (Timer Mode)
C61 -
Single Kitchen Time (Independent of elements.)
C62 -
Multi-Timer (Tied to each element.)
* Options in grey are default settings
16