GE Moisture Target Series 6, Руководство пользователя

Страница: 77 / 132

Chapter 3. Operation and Programming
Moisture Target Series 6 Hygrometer User’s Manual 67
3.6.7 Entering the M Series Probe Serial Number
Note: The following procedure applies only if an
M Series
probe is being
used. If a
VeriDri
probe is used,
Probe SN
is not accessible.
To update the probe serial number, from the
Settings Menu
select
Cal Data
and press
Enter . The following screen appears.
Note: To access the
Cal Data
menu, the
User
Passcode
is required (see section 3.6.1 on
page 56).
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Once the passcode has been entered,
press
Enter a screen similar to the
following appears.
To view and/or edit the probe serial number,
select
Probe SN
and press
Enter
. The
following screen appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Once the changes have been made,
press
Enter . The screen returns to the
Cal Data
menu.