GE Moisture monitor series 3, Руководство по программированию

Страница: 87 / 99

March 2008
4-8 Programming with PanaView
Programming Error
Handling
1.
To program the
MMS-3
for error handling, click on the “ Errors”
tab.The screen appears similar to Figure 4-6 below.
2.
Enter the desired values for the low and high error settings in the
appropriate text boxes.
3.
To program the meter’s response to errors, pull down the “ On Low
Error” list box, and click on one of five choices:
•
Ignore error
•
Go to high limit
•
Go to low limit
•
Hold last value
•
Go to error value.
4.
Repeat this selection with the “ On High Error” list box.
5.
Click on
[Apply]
to apply the changes immediately, and on
[OK]
to
confirm the changes and close the window. To return the window
to its previous settings, click on the
[Cancel]
button.
Figure 4-6: Error Handling Tab