GE Moisture monitor series 3, Руководство по программированию

Страница: 49 / 99

Advanced Programming 3-21
March 2008
Viewing Logged Data and
Status
If you selected
STATUS
:
To view data, refer back to the “View Data Log” option above in the
Data Logging menu. If you are done, skip to page 3-22.
If you selected DATA:
Use the following keys to view data:
•
Use the arrow keys to scroll to the desired measurement parameter
to view (e.g., temperature, oxygen).
•
Use the
[1]
key to view the next measurement taken at the specified
interval (e.g., move from the measurement logged at 17:35 to the
measurement logged at 17:36).
•
Use the
[3]
key to scroll to the previous measurement recorded at
the specified interval (e.g., move from measurement logged at 4:01
to the measurement logged at 4:00).
•
Press
[NO]
to end viewing data. To view the status, refer back to
Step 2. If you are done, proceed to page 3-22.
Data Logging 1 Use the arrow keys to select
VIEW
and press
[YES]
.
SETUP [VIEW]
View Data Log 1
Use the arrow keys to move the
brackets to one of the selections
and press
[YES]
.
[STATUS] DATA
Storage: Internal
The log status will display each
of the following screens for two
seconds before returning to the
# Bytes Free: 65269 Data Logging menu.
# Bytes Used: 839
Records: 78
Rem: 23:46:44
Searching . . .
The
MMS-3
displays data similar
to the following:
Log Started at:
10/3/00 14:33
TIME CH1:02%:
14:36:55 ERR01