GE MG25326, Руководство пользователя

Страница: 8 / 40

6
Setup and Connections
VIDEO
R
L / MONO
AUDIO
R
L
CABLE/
ANTENNA
VCR
CONTROL
IN
OUT
3
1
4
2
Advanced Connections
Advanced connections give you better sound and video by
separating the audio and video signals and enabling you to
connect multiple components.
This section describes the types of inputs available on the back
of your TV and suggests ways you can use them for optimum
performance.
Back of the TV
The number of jacks on the back panel of your TV depends on
the model number of your TV. Find out the model number of
your TV and look for its corresponding diagram either below or
on the next page. When connecting A/V cables, be sure to
connect corresponding OUTPUTS and INPUTS (Video to Video,
Right Audio to Right Audio, etc.).
Once you have made your
connections you will need to
program the TV to tune to the
correct Video INPUT channel in order
to see and hear audio and video from
the component. You will program
this later in the
Interactive Setup.
Model MG27526
1 VIDEO and AUDIO IN Use these input jacks to connect a
VCR, Laserdisc player, DVD player, satellite receiver or
Internet Access Device. To view the component connected to
VIDEO, use the INPUT button on the remote.
2 AUDIO OUT Use these output jacks to connect to an
audio receiver or amplifier for variable controlled or fixed
level stereo output.
3
VCR CONTROL This jack is for a feature not available in
your market at the time of this printing. The circuitry that
would allow this feature to work has been disabled in your
TV.
4 CABLE/ANTENNA Takes the signal input from a cable,
cable box, or an off-air antenna. Can also be used for basic
component connections.