MDS 05-4846A01, Rev. H
SD Series Technical Manual
83
•
Channel Usage
—Set to either intrusive or passive as desired.
•
Packet Data Size
—Used to specify the size of the reprogramming
data packets. Default size is
40
.
•
Retry Count
—Used to specify the number of times a transmission
is repeated when a packet is not received correctly. Default set-
ting is
3
.
•
Reprogram Block Size
—Sets the overall block size (in bytes) of each
data packet. Default setting is
512
.
•
Auto-Reboot
—When enabled, causes the transceiver to automati-
cally reboot after a firmware image upgrade. If disabled, the
newly loaded image will not become valid until the transceiver is
rebooted manually.
•
Download Delay
—This field can be used to introduce a time delay
when reprogramming begins. Typically, it is set to
Extended Delay-1
,
but may be increased incrementally by selecting one of the
extended delay times from the drop-down box (
Extended Delay-1, 2,
3, None
)
Verify Image
This screen is used to verify the integrity of an image stored in flash
memory. You may wish to verify an image after reprogramming or as
part of a troubleshooting sequence.
•
Verify
—Click this button to verify the firmware image selected in
the drop-down box at the top of the screen. The available selec-
tions from the box are:
Current active image
,
Image 1
,
Image 2
, and
Inac-
tive image
.
Copy Image
