132
MDS iNET Series Reference Manual
05-2806A01, Rev. L
APPENDIX A. MDS INET/ENI PROTOCOLS
A.1
Introduction
This appendix covers the MDS
i
NET 900 ENI, which provides expanded gateway and protocol conversion
capabilities not found in the MDS
i
NET 900. Throughout this document, the iNET 900 ENI is referred to
as iNET/ENI. If iNET/ENI is required for your application, contact your factory representative to obtain the
appropriate ENI file(s).
The iNET/ENI currently contains gateway conversion services for:
•
TCP, UDP, and PPP
: Identical to the iNET 900.
•
DF1 to EIP
: Provides EtherNet/IP (Ethernet Industrial Protocol) connectivity for DF1 full-duplex
devices.
•
MODBUS to MODBUS TCP
: Provides Modbus TCP connectivity for Modbus RTU or Modbus
ASCII Slave devices.
Additional gateway services and protocol support are planned for future firmware releases.
NOTE:
This appendix assumes you have an understanding of Ethernet networking and TCP/IP.
A.2
Selecting New Protocols
6
1
SELECTING NEW IP
PROTOCOLS
Perform the following procedure to select one of the new protocols supported by the iNET/ENI:
1. Access the MDS iNET’s Serial Configuration Wizard as described in this manual.
2. Select the IP Protocol screen displays. See Figure A-1below.
Figure A-1. Select IP Protocol Screen
Содержание MDS iNET Series
