background image

4  |  

GE Oil & Gas

1. General

These installation, operation, and maintenance instructions apply to Masoneilan VariPak* 28000 series control 
valves. They also include a parts reference list with recommended spare parts (see page 21).

IMPORTANT REMARKS

Before installing, operating, or performing maintenance on this equipment, you should read 

these instructions carefully and make sure you have understood them.

Work on this equipment should only be carried out by qualified personnel.

Failure to follow the instructions and precautions given in this document could lead to a 

malfunction and seriously damage the equipment.

1.1 SPARE PARTS

For maintenance purposes, always use original 
Masoneilan spare parts obtained through your local 
GE representative or Spare Parts Department. When 
ordering, always give the references of the original 
order for the equipment concerned and, in particular, 
the number indicated on the serial plate. (135).

1.2 AFTER SALES DEPARTMENT

GE has a highly skilled After Sales Department to assist 
customers with start-up, maintenance, and repair of 
valves and instruments. Contact your nearest GE Sales 
Office or Representative, or the After Sales Department 
at the Condé-sur-Noireau plant, in France.

1.3 TRAINING

GE organizes regular training courses in the operation, 
maintenance, and application of its Masoneilan 
control valves and instruments for customer service 
and instrumentation personnel at its Condé-sur- 
Noireau plant. For further details, contact your local 
GE representative or the Training Department at the 
Condé-sur-Noireau plant, in France.

Based on general field failure data and product design analysis, a useful life period of 
25 years or longer can be expected for the Masoneilan 28000 Series Varipak valves. 
To maximize the useful life of the product it is essential to conduct annual inspections, 
routine maintenance and ensure proper installation to avoid any unintended stresses 
on the product.  The specific operating conditions will also impact the useful life of the 
product. Consult the factory for guidance on specific applications if required prior to 
installation.

Содержание Masoneilan VariPak 28000 Series

























Отзывы: