GE MAC 5000, Руководство оператора

Страница: 145 / 228

Defining the System Setup: Define the ECG Setup
MAC 5000 System — 2000657-024, Revision A
12-21
Define the ECG Setup
ECG Acquisition/Analysis
Select this function to define the ECG acquisition and
analysis parameters.
System Setup
ECG
Basic System
ECG Acquisition/Analysis
057A, 168A,
Figure 12-10.
ECG Acquisition/Analysis
Item Description
Baseline roll filter Use this filter to remove baseline sway.
The higher the setting, the more the
filter smooths out a wandering
baseline. This filter does NOT distort
the ST segment displayed on the ECG
reports.
Pre-acquisition Select Yes to begin acquiring ECG data as
soon as the leadwires are connected to a
patient.The system does not wait until the
user presses
ECG before it starts
acquiring ECG data. The latest 10 seconds
of ECG data is ready for analysis when
Pre-acquisition is turned on.
Disable auto gain
check Select No, to display a prompt after the
user presses ECG if the gain of the
recorded ECG data is either too high or too
low. The user can adjust the gain.