GE Lumination LDXB Series, Руководство по установке

Страница: 8 / 11

8
Lumination
®
LDXB Series Installation Guide
Electrical Connections
For Standard (VQ):
Connect the black (line) of the AC line to the black 120V,
277V, or 347V wire. Connect the white (neutral) wires of the
AC line to the white wires using the provided 18-12 AWG
push-in connectors. Finally, connect the green (ground) wire
of the AC line to the green wire using the provided 18-12
AWG push-in connector.
Optional: If using a 0-10V dimming controller,
connect matching-colored wires together.
Risk of damage: Make sure that supply connection, light
fixture wiring, and dimming cables are connected to proper
driver inputs. Wrong connection may cause damage to the
product.
Must use UL approved conduit fitting for all enclosure box connections to
prevent wire cuts by sharp edges and excessive strain on wiring.
For Options (TQ and TS):
Connect the black (line) of the AC line to the black 120V,
277V, or 347V wire. Connect the white (neutral) wires of the
AC line to the white wires using the provided 18-12 AWG
push-in connectors. Finally, connect the green (ground) wire
of the AC line to the green wire using the provided 18-12
AWG push-in connector.Leave the red wire unconnected.
For Options (EL):
Connect the black (line) of the AC line to the black 120V,
277V or 347V wire. Connect the white (neutral) wires of the
AC line to the white wires using the provided 18-12 AWG
push-in connectors. Connect the unswitched line of the AC
line to the red wire. Finally, connect the green (ground) wire
of the AC line to the green wire using the provided 18-12
AWG push-in connector.Leave the red wire unconnected.
Warning: Close the door or the cover after finishing the wiring.
Make sure to rescrew the screw for the configurations TQ, TS or EL.