GE Lullaby Warmer Скачать руководство пользователя страница 71

Страница: 71 / 165

Lullaby

Illustration

Description

Figure 57:

Bedside Panels Assembly

Assemble  the  four  bedside
panels.    Refer  to  7.1.19,
Replacing  the  Bedside  Panel,
to fix the four bedside panels.

NOTE: Peel off the protective cover on

the bedside panels before the unit
is put into use.

Figure 58:

Mattress, Clear Plexiglas

Plate, and X-tray Tray Assembly 1

Place the clear Plexiglas plate
and the mattress on to the
bed base.

Slide in the X-ray tray through
slots firmly.

NOTE: Peel off the protective cover on

the clear Plexiglas plate before the
unit is put into use.

Figure 59:

Pillar and Bed Assembly

Bedside Panel

Mattress

Clear
Plexiglas
Plate

X-ray
Tray

Содержание Lullaby Warmer























































































































































Результаты поиска

Содержание Lullaby Warmer

Отзывы:

Похожие инструкции для Lullaby Warmer

Бренды по названию

Популярные бренды

GE Lullaby Warmer, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Lullaby Warmer

Отзывы:

Похожие инструкции для Lullaby Warmer

Бренды по названию

Популярные бренды