GE LOGIQ V3, Базовое руководство по обслуживанию

Страница: 90 / 305

System Setup
3-14 LOGIQ V3/V5/V5 Expert – Basic Service Manual
5726264-100 English Rev.8
3-5 Completing the setup
3-5-1 Purpose of this section
This section describes how to complete the installation of
LOGIQ V3/V5/V5 Expert.
3-5-2 Contents in this section
• 3-5-3 ‘System specifications’ on page 3-14
• 3-5-4 ‘Electrical specifications’ on page 3-16
• 3-5-7 ‘Connections on the I/O Rear Panel’ on page 3-20
• 3-5-8 ‘Connecting probes’ on page 3-20
• 3-5-9 ‘Powering the system’ on page 3-20
3-5-3 System specifications
3-5-3-1 System requirements verification
• Verify that the site meets the requirements listed in
Chapter 2.
(See:
2-3 ‘Facility needs’ on page 2-12 .)
• Verify that the specifications below don’t conflict with any
on-site conditions.