GE LOGIQ P3, Руководство по обслуживанию

Страница: 38 / 348

GE
D
IRECTION
5308917-100, R
EVISION
8 LOGIQ P3 S
ERVICE
M
ANUAL
1-6 Section 1-2 - Important Conventions
1-2-3 Product Icons
The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Table 1-6 Warnings
LABEL/SYMBOL PURPOSE/MEANING LOCATION
Identification and Rating Plate • Manufacture’s name
• Date of manufacture
• Model and serial numbers
• Electrical ratings (Volts, Amps, phase,
and frequency)
See ‘Identification and Rating Plate’ on
page1-6 for more information.
Type/Class Label Used to indicate the degree of safety or
protection.
IP Code (IPX1 or IPX8) Indicates the degree of protection
provided by the enclosure per IEC60
529. IPX1 cannot be used in operating
room environment; IPX8 can be used in
operating room environment. Bottom of Footswitch
Equipment Type BF (man in the box
symbol) IEC 878-02-03 indicates B
Type equipment having a floating
applied part.
Probe and PCG marked Type BF
ATTENTION - Consult accompanying
documents is intended to alert the user
to refer to the operator manual or other
instructions when complete information
cannot be provided on the label.
Various
“CAUTION - Dangerous voltage” (the
lightning flash with arrowhead in
equilateral triangle) is used to indicate
electric shock hazards.
Rear panel and inside of console
“Mains OFF” indicates the power off
position of the mains power breaker. See the Console Overview section for
location information.
“Mains ON” indicates the power on
position of the mains power breaker. See the Console Overview section for
location information.
“ON” indicates the power on position of
the power switch.
CAUTION:
This Power Switch
DOES
NOT ISOLATE
Mains Supply.
“Standby” indicates the power standby
position of the power switch.
CAUTION:
This Power Switch
DOES
NOT ISOLATE
Mains Supply.
See the Console Overview section for
location information.
“Protective Earth” indicates the
protective earth (grounding) terminal. Internal