GE LCD Keypad, Руководство пользователя

Страница: 16 / 27

LCD Keypad
14
Open 75
9/25 17:57 P3*
4. To view the events from the oldest to the newest, press [
•
]. The display
contains the following information.
Event
º ³
User or Zone ID
Date
º »
Indicates partition
(Month/Day)
ü
Time shown in and
r
indicates an
24 hour format event not reported
This screen shows an opening of Partition 3 on September 25
th
at 5:27 p.m. by
user 75. The
r
shows that this event is not programmed to be reported to the
central monitoring station. Refer to Appendix A on page 21 for a list of possible log
messages.
ADJUSTING THE VIEW / BRIGHTNESS OF THE LCD
1. Enter [
r
] [9] [1]. The LCD will prompt for a code.
2. Enter [master code]. The LCD will prompt you to raise or lower the view.
3. Use [
•
] [
–
] to raise or lower the viewing angle of the text.
4. Press [
r
] to advance to the Brightness option. The LCD will prompt you to
brighten or dim the LCD lighting. Use [
•
] [
–
] to adjust to desired brightness.
5. Press [#] to exit.
SETTING THE SYSTEM CLOCK
1. Enter [
r
] [9] [7]. The LCD Screen will prompt for a code.
2. Enter [master code]. The time and date will be displayed with the current
hour flashing.
3. Use [
•
] [
–
] to select the proper hour.
4. Press [
r
] to move to the minutes, day of week, date, month, and year.
5. Repeat Steps 3 and 4 until the entire time and date are set.