NOTE:
Non-dimmable On/Off only lighting devices can be
added to Scenes in either On or Off mode so as an example,
the same light could be ON in Scene 1 and Off in Scene 2. Step
7 above is skipped when adding an On/Off only device to a
Scene.
Removing a device from a Group or Scene
NOTE:
This process is the same for Groups and Scenes. The only
difference is which button you Press in step 3.
1.
Press and hold Add and Remove buttons at the same time
until the Orange LED blinks twice, then release.
2.
Press and release the Remove button.
3.
Press and release the Group or Scene button.
4.
Press and release the right side (ON) of the button that
controls the Group or Scene (1, 2, 3 or 4) from which you want
to Remove the device
5.
Press and release the button on the device you wish to
Remove.
6.
The Orange LED will stop blinking and Green LED will blink
twice to show that you have successfully removed a device
from a Group.
Controlling your devices
This device can control both Groups and Scenes. Use the
Group and Scene buttons to select the mode you want to
control. This controller will stay in that mode until the other
mode is selected.
1.
Press and release the Group or Scene button. The controller
will enter that control mode.
