background image

0150-0257A 

49 

Kalatel DVMRe-4L 

8.2  Warranty and Return Information 

GE-Interlogix warrants all of its equipment for three years from the date of purchase. This warranty covers 
any defects in materials and workmanship. Equipment failures that are due to improper installation, 
modification, abuse, or acts of nature will not be covered by this warranty. The repair department will 
evaluate all equipment returned for repair to determine warranty coverage. The Tech Support Manager 
will resolve any questions that may arise during evaluation to make a final determination. 

Note: 

The three-year warranty does not apply to the following products: 

MobileView

® 

and the monitor CRT, which carry a 12-month warranty from the date of purchase.

 

The warranty specifically covers any defects in material and workmanship and does not cover equipment 
that has been abused, damaged, or modified. 

For all warranty repairs

, GE-Interlogix will cover all costs, including parts, labor, and shipping. Repaired 

equipment will be returned via the same method of shipment in which it was received. If a customer 
requests a faster return shipment, the difference will be charged. 

For all non-warranty repairs

, the customer will be billed for parts, labor, and shipping. Labor will be 

billed in half-hour increments. 

Note: 

Customers requesting an estimate prior to repair will be notified by phone. If they cannot be reached, they will be notified by 

fax. If we are unable to reach the contact person for repair authorization after one phone attempt and two fax attempts, the 
equipment will be returned without being repaired. We will hold equipment no longer than two weeks.

 

Advance Replacement Policy 

When an advance replacement is required, we will send the customer replacement equipment from our 
stock and receive the returned product in exchange. The received equipment will be evaluated and the 
repair department will determine whether it is a warranty replacement. If it is non-warranty, see our repair 
policy above for details. The following guidelines will be used for all advance replacements: 

• 

Fewer than 45 days from purchase, GE-Interlogix will replace the product with new equipment. 

• 

From 45 days to 1 year from purchase, GE-Interlogix will replace the product with refurbished 
equipment. 

• 

From 1 year to 3 years from purchase, the product must be sent in for repair. Advance 
replacements will be sent for a fee of $100. 

If you have questions about this policy, please contact GE-Interlogix Kalatel Division’s RMA Department 
at 800-469-1676.

Содержание Kalatel DVMRe-4L



















































Отзывы: