Installation
Microwave Oven
Instructions
Built-In Trim Kits
1
❒
BefOre YOu BegIn
read these instructions completely and carefully.
•
IMPOrTAnT
—
Save these instructions
for local inspector’s use.
•
IMPOrTAnT
—
Observe all governing codes and
ordinances.
•
note to Installer –
Be sure to leave these instructions with
the Consumer.
•
note to Consumer –
Keep these instructions for future
reference.
•
Skill level –
Installation of this appliance requires basic
mechanical and electrical skills.
•
Completion time –
1 to 3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered
under the Warranty.
• This kit is for use on models:
PEM10SFC, PEM10BFC, PEM10WFC and CEM11SFC
• Do not alter or modify any part of this kit or the oven.
• For easier installation and personal safety, we
recommend that two people install this microwave oven.
• Unplug the microwave oven before attempting installation
of this kit.
WArnIng
—
This oven must be plugged into a
properly grounded 3-hole, 120 volt receptacle as required by
the National Electrical Code.
Questions? Call 1-800-561-3344 or Visit our Website at: geAppliances.ca
PArTS InCluded
PArT
QuAnTITY
❒
Base Pan
1
❒
Rail
2
❒
Trim Kit
1
❒
4 mm x 10 mm
11 required
Screw A
3 extra
❒
4 mm x 16 mm
4 required
Screw B
2 extra
nOTe:
This kit has extra screws to prevent the technician
from spending extra time locating a replacement in case
they lose one during installation.
fOr YOur SAfeTY:
WArnIng
—
Before beginning the installation,
switch power off at service panel and lock the service
disconnecting means to prevent power from being switched
on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
JX827 and JX830
1” 2.5 cm; 1’ = 0.3 m
