CAUTION:
Let the light bulb
cool completely before removing . A warm or
hot bulb may break if touched with a moist
cloth or hand .
Remove the bulb and replace it with an
incandescent light bulb with an ordinary
screw base,
not more than 60 Watts
, or
a Compact Fluorescent (CFL) light bulb
with an ordinary screw base,
than 13 Watts
.
IMPORTANT:
For installation, handling and
disposal precautions, refer to the fluorescent
bulb packaging literature .
To remove the light cover
• Press the sides with two fingers until the
side prongs are released .
• Lift the light cover and slide it toward you
in one motion .
To replace the light cover:
• Insert the prong located at the end of the
cover into the top opening .
• Gently push the cover up and press the
sides to fit the side prongs into the side
openings .
• Release and the cover will lock in position .
Hood Light
The charcoal filter cannot be cleaned.
It must be replaced. Order filter no.
WB02X10700. Replacement filters can be
ordered from your GE supplier.
If the hood is not vented to the outside, the
air will be recirculated through a disposable
charcoal filter that helps remove smoke and
odors .
The charcoal filter should be replaced after 6
to 12 months (depending on hood usage) .
To remove:
Pull down on the center of the front edge
of the filter . The filter will then slip out of the
retaining tabs on the back .
To replace:
Slip the back edge of the filter into the
retaining tabs and push the front edge up
until it snaps into place .
Charcoal Filter—Recirculating Installations Only
Do not use steel-wool pads or other
abrasive cleaners. They will scratch the
surface.
Clean grease-laden surfaces of the hood
frequently . To clean the hood surface, use
a hot, damp cloth with a mild detergent
suitable for painted surfaces . About one
tablespoon of ammonia may be added to
the water . Use a clean, hot, damp cloth to
remove soap . Dry with a dry, clean cloth .
NOTE:
When cleaning, take care not to
come in contact with filters and other non-
enameled surfaces .
CAUTION:
When cleaning the
hood surfaces, be certain that you do not
touch the light bulb with moist hands or
cloth. A warm or hot light bulb may break if
touched with a moist surface. Always let the
light bulb cool completely before cleaning
around it.
Painted Surfaces
Replaceable charcoal filter
5
NOTE:
DO NOT rinse, or put charcoal
filters in an automatic dishwasher.
Light cover
not more
Содержание JV347IFWW
Страница 1: ......