PREPARING YOUR OVEN
Place the oven on a table or
platform even with the cutout
opening. (Platform must support
225 lbs. )
Remove the bottom trim from the top of the oven. It
will be installed at the end of installation. The trim is
wrapped separately and taped to the top of the unit.
Open oven door and
remove literature
prepack, broiler pan
and grid, and oven
racks. Open
microwave door and
remove shelves and
turntable package.
Remove Installation Instruction
from literature prepack and read
them carefully before you begin.
Be sure to place all literature, Use
and Care, Installations, etc. in a
safe place for future reference.
Open the oven door to the stop
position.
CAUTION: When the door is
removed and the hinge arms are at
the stop postion, DO NOT bump
or try to move the hinge arms.
The hinges could snap back causing an
injury to the hands. Cover the hinges with
toweling or empty towel rolls while
working in the oven area.
DO NOT LIFT THE
DOOR BY THE HANDLE!
Grasp the door on both sides and lift up and off the
hinges.
NOTE:The oven door is very heavy. Be sure you have a
firm grip before lifting the oven door off the hinges. Use
caution once the door is removed. Do not lay the door on
its handle, this could cause dents or scratches
1
Remove packaging
materials. Check
inside microwave,
behind hinges, and
under false bottom.
Remove labels on
door, plastic on trims
and panel, and all
tape around oven.
2
3
4
5
4
6
7
8
Cover hinge with paper
towel rolls or toweling.
