background image

7

Installation Instructions

Cutout for Single Built-In Oven
Under Counter

NOTE: This oven is not approved to be
installed under a solid disk, induction
or downdraft modular cooktop.

A3

25"

Gas or electric cooktops
may be installed over this 
oven. See cooktop installation 
instructions for cutout size. 
See label on top of oven for 
approved cooktop models.

Gas and electrical connections 
for 30" gas cooktop must be 
located in an adjacent accessible 
location to the right. For a 36" 
gas cooktop the connections 
may be made to the left.

5"

240V / 208V
Junction Box 
Location

36" 
Typical
Countertop
Height

24"

Allow 11/16"
Overlap Top 
of Oven &
Side Edges 
of Cutout

28 1/2" MIN.
28 5/8" MAX.

27 1/4" MIN.
27 5/16" MAX.

Top and/or side 
fillers may be 
necessary if 
unit is positioned 
between existing 
cabinets. Be sure
they are attached
securely since 
they will anchor
the oven in the 
cabinet.

3/4" Support

Platform

Required

MUST SUPPORT 150 LBS. 

22" MIN. 

Above 

Support 
Platform

5 9/16"
Reference dimension
for maximum support height
with typical 36" countertop 
height

MUST SUPPORT 150 LBS.

3/4

Support Platform

Required

25

5

24

Gas and electrical connections for
30

 gas cooktop must be located

in an adjacent accessible location
to the right. For 36

 gas cooktop,

the connections may be made
to the left.

240V / 208V
Junction Box
Location

36

Typical
Countertop
Height

22

” 

Min.

Above
Support
Platform

5 9/16

Reference dimension for
maximum support height with
typical 36

 countertop height

Allow 1

 overlap

top of oven and
11/16

” 

overlap

side edges of
cutout

Top and/or side fillers
may be necessary
if unit is positioned
between existing
cabinets. Be sure
they are attached
securely, since they
will anchor the oven
in the cabinet.

Gas or electric cooktops may
be installed over this oven.
See cooktop installation
instructions for cutout size.
See label on top of oven for
approved cooktop models.

28 1/2

” 

Min.

28 5/8

” 

Max.

27 1/4

” 

Min.

27 5/16

” 

Max.

Содержание JTP20

















Отзывы: