Installing the Cooktop
B
Install an approved junction box where
it will be easily reached through the
front of the cabinet where the cooktop
will be located.
The cooktop conduit
is 3 feet long.
B1
IMPORTANT: The junction box
must be located where it will
allow considerable slack in the
conduit for serviceability.
B2
B3
Apply the foam strips around the outer
edge of the glass.
Do not overlap the
foam strips.
B4
Remove the Hold Down Brackets
and screws from the literature
package.
Place a towel or tablecloth onto the
countertop. Lay the cooktop upside
down onto the protected surface.
B5
Screw the Hold Down Bracket to the
side of the cooktop unit. Repeat for
opposite side of cooktop.
MOUNTING
SCREW
5
Installation Instructions
Install junction box
so that it can be reached
through the front of
the cabinet.
16"
Min.
Installing the Junction Box
Protect Surface of Cooktop
Attach Foam Strips
Foam Strips
Bottom of
Cooktop
Cooktop
Glass
Locate Mounting Parts
Attach Brackets to Cooktop
(Continued on following page)
Bottom of cooktop
Cloth under Cooktop
Foam Strips
Bottom of
Cooktop
Cooktop
Glass
Pre-drilled
hole
Hold Down
Bracket