GE JP350, Техническое обслуживание руководство

Страница: 12 / 39

– 10 –
Indicator Lights
Lights will come ON next to the bridge, warmer,
dual unit, or control lockout pads when touched,
to indicate the surface element or feature is
energized. The light will go OFF when the sur-
face element or feature is turned OFF.
HOT SURFACE Indicator Lights
The HOT SURFACE indicator lights will glow
when any surface unit is turned ON and will
remain on until the surface has cooled to ap-
proximately 150°F.
Controls Lockout
Note: For your convenience, the entire cooktop
can be locked at any time.
To lock the cooktop, touch and hold the CON-
TROL LOCK pad for 3 seconds. A 2-beep signal
will sound, the word LOCK will appear in the
timer display, and the CONTROL LOCK light will
turn ON indicating the cooktop is locked. If the
cooktop is locked while the surface elements or
timer are in use, they will automatically turn OFF.
To unlock the cooktop, touch and hold the CON-
TROL LOCK pad again for 3 seconds. A
2-beep signal will sound and the light will go
out, indicating the cooktop is unlocked.
Locking the cooktop will prevent surface
elements from accidentally being energized by
children or pets. You may lock the cooktop
when not in use or before cleaning.
Kitchen Timer
Operate the timer using the pad below the timer
display. Touch the ON/OFF pad, then touch the
(+) or (-) pad to choose the desired time setting.
If the (+) or (-) pad is held for several seconds,
the timer will increase or decrease at a faster
rate. After choosing your desired time, the timer
will automatically start to count down from the
hours/minutes you have selected. When the
timer reaches 1 minute, the control will beep
once and the timer will display the remaining
time in seconds until 00:00. The control will then
beep twice every 5 seconds until the timer is
turned OFF.
Pan Detection
Note: For this feature to function properly, the
metallic pan must be at least 4 in. in diameter
and centered on the surface element. This
feature will not work with glass cookware and
must be turned OFF when glass cookware is
used.
The pan detection feature works in the following